paramondo Pergorama 4000 Installation Instructions Manual page 76

76
Mounting
The hooked awning cassette is not yet fixed. Do not let it go.
In order to connect the awning cassette with the wall bracket, it is necessary to insert one locking device
per wall bracket is necessary.
For the first blocking, use the blocking device A and push it onto the wall bracket as shown in the picture
below.
When you have pushed the blocking device A completely onto the wall console, tighten the screws
on it tightly.
Awning
cassette
7
Insert the threaded rod into the wall brackets. Do not fully tighten the grub screws. These are tightened
after the entire product has been assembled.
8
Wall bracket
Threaded rod
www.paramondo.de
Screws on
Blocking device A
Blocking device A