Table of Contents
Advertisement
Serial ATA Connectors: SATA1/SATA2
SATA1/SATA2 are dual high-speed Serial ATA interface ports. Each supports
serial ATA data rates of 150MB/s. All connectors are fully compliant with Serial ATA1.0
device. Each Serial ATA connector can connect to 1 hard disk device.
(Note: Lite Version has only one SATA connector.)
1
7
SATA1/SATA2
Fan Power Connectors: CPU_F1/CPU_F2
The CPU_F2(processor fan) and CPU_F1 (system fans) support system cooling
fan with +12V. It supports three-pin head connector. When connecting the wire to the
connectors, always take note that the red wire is the positive and should be connected
to the +12V, the black wire is Ground and should be connected to GND. The mainboard
has a ADT7467 chip to detect CPU/fab temperature, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at Intel
or consult the vendors for proper CPU cooling fan.
SATA1/ SATA2 Pin Definition
PIN
SIGNAL
1
GND
3
TXN
5
RXN
7
GND
GND
+12V
Sensor
CPU_F2
CPU_F1
Hardware Setup
PIN
SIGNAL
2
TXP
4
GND
6
RXP
GND
+12V
Sensor
®
®
/ AMD
official website
2-15
Advertisement
Table of Contents
