Chapter 2
Internal Speaker Connector: CON1
This connector is used to connect the built-in internal speaker.
On-Board S-Video out Connector: JTV1
The mainboard provides a TV-out connector for you to connect to a TV
or video device.
Serial ATA Connectors: SATA1, SATA2
The southbridge of this mainboard is ICH5 which supports two serial
connectors SATA1& SATA2.
SATA1 & SATA2 are dual high-speed Serial ATA interface ports. Each
st
supports 1
generation serial ATA data rates of 150 MB/s. Both connectors are
fully compliant with Serial ATA 1.0 specifications. The Serial ATA connector
allows you to connect the hard disk device of Serial ATA interface.
SATA1 & SATA2 Pin Definition
PIN
SIGNAL
1
GND
3
TXN
5
RXN
7
GND
CON1
JTV1
PIN
SIGNAL
2
TXP
4
GND
6
RXP
2-22
SATA1/SATA2