Table of Contents
Advertisement
M S-6415 Barebone
Integrated Peripherals
VIA OnChip IDE Device
Press <Enter> and the following sub-menu appears:
On-Chip Serial ATA A
This setting is used to specify the SATA controller. The settings are:
[Disabled] Disable the SATA controller.
[Auto]
[Legacy Mode]
channel
[Native Mode]
SATA Mode
This setting is used to select the SATA mode. The setting are:
[IDE]
no AHCI, no RAID
3-12
PATA and SATA will be arranged by BIOS, and you will be
able to see the IDE Device status listed in Standard COMS
Features.
PATA and SATA will be combined. Max. of 2 IDE drives in each
are available.
PATA and SATA will both be enabled. Max. of 6 IDE drives are
supported.
Advertisement
Table of Contents
