M S-6417 Barebone
Soft-Off by PWR-BTTN
W hen [Enabled], turning the system off with the on/off button places the sys-
tem in a very low-power-usage state, with only enough circuitry receiving
power to detect power button activity or Resume by Ring activity.
Wake-Up By PCI card
W hen setting to [Enabled], this setting allows your system to be awakened
from the power saving modes through any event on PCI PME (Power Manage-
ment Event).
USB KB WakeUp From S3 (S4)
W hen setting to [Enabled], this setting allows your system to be awakened
from S3 state.
Resume by Alarm
W hen [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
PWRON After PWR-fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Former-sts]
3-16
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power fail
ure or interrupt occurred.