Table of Contents
Advertisement
M S-6417 Barebone
SuperIO Device
Press <Enter> and the following sub-menu appears:
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDD) in-
stalled on the system board and you wish to use it. If you install add-on
FDC or the system has no floppy drive, select [Disabled] in this field.
Onboard Serial Port 1/2
These items specify the base I/O port addresses of the onboard Serial
Port 1/ Serial Port 2. Selecting [Auto] allows AMIBIOS to automatically
determine the correct base I/O port address. Settings: [3F8/IRQ4], [2F8/
IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
3-14
Advertisement
Table of Contents
