Table of Contents
Advertisement
Remove all Falcon-1 contents from the box. Ensure all contents from the "PARTS LIST" section are accounted
for.
1. Locate the 2 M8 long screws, 2 large metal washers, and 4 rubber washers. Slide 1 large metal washer and 1
rubber washer onto 1 M8 long screw. Insert the screw into the side of a handlebar mount and attach another
rubber washer to the end of the screw. Align the hole on the side of the seat frame with the screw and insert the
screw. Insert the hex key into the head of the screw and turn it clockwise to tighten the screw. Repeat these steps
for the other screw and handlebar mount.
ASSEMBLING YOUR FALCON-1
Tools
needed
x 4
x 2
Large
5
Advertisement
Table of Contents
