Table of Contents
Advertisement
2. Secure your Falcon-1 to your hoverboard using 2 of the included hook and loop straps. With the fastener
side facing away from your hoverboard, thread the straps through the outside hole of each handlebar
mount.
3. Wrap both straps underneath the hoverboard and pull them through to the other side. The rubber
protective straps should be centered underneath the hoverboard, with side B facing the ground (see image
below). Insert the straps into the rear hole of each handlebar mount. Fasten the front and rear sides of the
straps. Make sure they are tightly secured to the hoverboard.
A
B
RUBBER PROTECTORS
HOOK & LOOP STRAP
FASTEN HOOK & LOOP
STRAPS
ASSEMBLY
10
Advertisement
Table of Contents
