Dell MD1400-16TB Setup Manual page 42

4. When you connect two or more PowerVaults to the RAID controller, make sure that you:
Connect the Primary Port 1 of the first Concentrator PowerVault to Port 0 of the RAID
l
controller.
Daisy chain up to three additional PowerVaults to the first PowerVault.
The following figure shows you how to connect eight PowerVaults to a
NetWitness Series 5 and Series 6 physical hosts.
Series 5 - R630 Attached to Eight PowerVaults
Series 6 - R640 Attached to Eight PowerVaults
5. When you finish the cabling, make sure that the PowerVault is powered on and then power
on the physical host.
Install PowerVault on Core Appliance Used as a Hybrid
PowerVault (Dell MD1400 - 16TB) Setup Guide
42