Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dahua D-TPC-HI20
Summary of Contents for Dahua D-TPC-HI20
- Page 1 Thermal Handheld Thermography Camera Quick Start Guide V1.0.0...
-
Page 2: Foreword
Foreword General This manual introduces the functions and operations of the thermal handheld thermography camera (hereinafter referred to as "the Camera"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in DANGER death or serious injury. - Page 3 compliance with the manual. The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version.
-
Page 4: Important Safeguards And Warnings
Important Safeguards and Warnings This chapter introduces the content covering the proper handling of the product, hazard prevention, and prevention of property damage. Read these contents carefully before using the product, comply with them when using, and keep the manual safe for future reference. Power Requirements All installation and operation must conform to your local electrical safety code. - Page 5 Do not tilt the package more than 30° in transit. There is a label on the surface of the package. That indicates if the tilted-angle is suitable. It is recommended to slowly carry or transfer the in a horizontal position. Do not press, vibrate or soak the Camera during the whole process of transportation, storage and ...
-
Page 6: Table Of Contents
Table of Contents Foreword ..............................I Important Safeguards and Warnings ......................III 1 Introduction..............................1 2 Checklist ..............................1 3 Structure ..............................2 Dimensions ..............................2 Appearance ..............................2 4 Basic Operations ............................5 Installing SD card ............................5 Enabling Laser Light ............................ 5 Measuring Target Temperature ........................ -
Page 7: Introduction
Introduction The thermal handheld thermography camera is used for measuring temperatures for industrial applications. It promotes non-contact and rapid temperature measurement of the targets and will alert you to any temperature anomalies. Extremely versatile and easy-to-use, it features the following functions: Simply point the laser light of the Camera at targets to view their temperature readings in seconds. -
Page 8: Checklist
Checklist Check the package according to the following checklist. You need to purchase the tools or accessories not included in the package separately. Figure 2-1 Checklist Table 2-1 Checklist Name Name Adapter Camera Five plugs are provided for Chinese, American, European, Australian, and British standards. -
Page 9: Structure
Structure Dimensions Dimensions (mm [inch]) Appearance Front interface... - Page 10 Table 3-1 Front interface introduction Component Description Display screen Displays live interface and menu interface. ● Press and hold to power on or off the Camera. ● On the live interface, press ，and the Camera goes to the standby state; under standby state, press any button to wake up the Camera.
- Page 11 Component Description Tripod port Used for installing a tripod. Silicon plug — Red light on: Charging. Green light on: Full charged. Charging indicator light The battery can be recharged repeatedly, but it is a wearable product. If the standby time of the Camera has been greatly reduced, contact the after-sales support to replace the battery.
-
Page 12: Basic Operations
Basic Operations The Camera supports temperature measurement, image capturing and video recording during temperature measurement. The manual is for reference only. Slight differences might be found between the manual and the product. Installing SD card Install an SD card before you can store images and record videos. Open the silicone plug on the top of the Camera. -
Page 13: Capturing Images
Figure 4-1 Measure target temperature Table 4-1 Live interface Name Name Recording videos Record time Unit Color bar Max temp point Time Center spot temperature Memory card state Center spot Power usage Capturing Images You can capture images manually and record temperature measurement information. Press to wake up the Camera. -
Page 14: Exporting Images And Recorded Videos
If no SD card is installed, "No SD Card" will prompt. Press to finish the recording. Exporting Images and Recorded Videos You can export images and recorded videos locally by connecting the Camera to your PC with a USB cable. Press to wake up the Camera. - Page 15 Press and hold to back up the new program. After hearing a ticking sound, the Camera will back up the program automatically. Wait until the Camera enters the live interface. Do not perform any operation during the backup. The Camera will be automatically restored to the backup program if the upgrade fails. ...
-
Page 16: Function Configuration
Function Configuration Supports configuring temperature parameters, temperature alarm, and viewing image and video files. The battery life will decrease when you turn on head temperature measurement, alarm linkage, snapshot linkage, and video recording linkage. Temperature Settings The Camera supports measuring the real-time temperature of target objects in different scenarios. Because temperature measuring parameters affect the accuracy of measurement results, you need to configure the temperature measuring parameters before measurement. -
Page 17: Temperature Measurement Settings
Parameter Description Emissivity The default value is 0.97. The distance between the measuring target and the Camera. Distance Make sure that the actual distance is consistent with this value, otherwise the accuracy will be affected. Temperature unit: °C, °F and K. You can switch the temperature unit by Unit pressing Press... -
Page 18: Viewing Images
Viewing Images SD Card has been installed. For details on installing SD card, see "4.1 Installing SD card." Press to wake up the Camera. On the live interface, press to enter the Menu interface. Select Picture Search > View Picture to view pictures. (Optional) Press to turn on/turn off Save Temp Pic. -
Page 19: System Settings
System Settings You can configure the general system parameters of the Camera. Press to wake up the Camera. to enter the Menu interface. Select System Settings, and On the live interface, press then press to confirm. Configure system parameters. Press to select parameters. - Page 20 Parameter Description and Yes to reset the Camera. Press No to cancel (Optional) Press Reset Device resetting.
-
Page 21: System Information
System Information You can view basic information on the Camera. Press to wake up the Camera. to enter the Menu interface. On the live interface, press Select System Information, press to confirm, and then you can view system parameters, including device type, system version, thermal core version, S/N, battery information and storage information. -
Page 22: Cybersecurity Recommendations
Cybersecurity Recommendations Mandatory actions to be taken for basic device network security: Use Strong Passwords Please refer to the following suggestions to set passwords: The length should not be less than 8 characters. Include at least two types of characters; character types include upper and lower case ... - Page 23 the risk of ARP spoofing. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks.
Need help?
Do you have a question about the D-TPC-HI20 and is the answer not in the manual?
Questions and answers