Supermicro A3SEV-2C-LN4 User Manual page 86

Super A3SEV-2C/4C-LN4 User's Manual
Security Function
Use this feature to set Security Function. The options are Disable, Set Password, Security
Erase - Password, and Security Erase - Without Password.
Password
Enter a numeric value to set the password.
HDD Security Configuration
Information is displayed when a storage device has been detected. A submenu also
becomes available to set a password for the storage device.
Lockdown Mode
This feature is grayed out when the DCMS Key is not installed.
 Secure Boot
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The options
are Disabled and Enabled.
Secure Boot Mode
This feature allows you to select the desired secure boot mode for the system. The options
are Standard and Custom.
*If Secure Boot Mode is set to Custom, Key Management features are available for
configuration.
 Key Management
This submenu allows you to configure the following Key Management settings.
Factory Key Provision
Select Enabled to install the default Secure Boot keys set by the manufacturer. The options
are Disabled and Enabled.
*If the feature above is set to Enabled, the next four features are available for
configuration:
Restore Factory Keys

Force System to User Mode. Install factory default Secure Boot key databases.
Reset to Setup Mode

This feature deletes all Secure Boot key databases from NVRAM.
86