Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 2. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are Auto, (IO=2E8h; IRQ=7), (IO=3E8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=220h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), and (IO=228h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Hardware Monitor
•
System Health
Fan Speed Control Mode
Use this feature to select the fan speed control mode. The options are Standard and Full
Speed.
•
CPU Temperature
•
Front T-sensor
•
Fan1 Speed
•
FanA Speed
•
PVDDQ
•
P12V
•
P5V
•
VCPU (PVCCIN)
•
3.3VCC
•
VSB
•
VBAT
Serial Port Console Redirection
COM1 Console Redirection
Select Enabled to enable console redirection support for the specified serial port. The options
are Enabled and Disabled.
73
Chapter 4: BIOS