Table of Contents
Advertisement
Super A3SEV-2C/4C-LN4 User's Manual
PCIe Speed
Use this feature to select the PCI Express port speed. The options are Auto, Gen1,
Gen2, and Gen3.
PCIe PLL SSC
Use this feature to enable or disable PCIe PLL SSC. The options are Enabled and Disabled.
Boot Feature
Quiet Boot
Use this feature to select the screen to display between POST messages or the OEM logo
at bootup. Select Disabled to display the POST messages. Select Enabled to display the
OEM logo instead of the normal POST messages. The options are Disabled and Enabled.
Bootup NumLock State
This feature selects the Power-on state for the Num Lock key. The options are Off and On.
Wait For "F1" If Error
This feature forces the system to wait until the F1 key is pressed if an error occurs. The
options are Disabled and Enabled.
Power Configuration
AC Loss Policy Depend On
Use this feature to set the power state after a power outage. Select Power Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power on, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override for you to power off the system after pressing and holding the power
button for four seconds or longer. Select Instant Off to instantly power off the system as soon
as the you press the power button. The options are Instant Off and 4 Seconds Override.
Boot eDP/VGA Select
Use this feature to select eDP or VGA as the display output. The options are eDP and VGA.
Watch Dog Function
If this feature is enabled, the Watch Dog timer will reboot system when it is inactive for more
than five minutes. The options are Disabled and Enabled.
68
Advertisement
Table of Contents
