Table of Contents
Advertisement
Which option you use is a matter of personal taste; we sometimes
switch back and forth depending on the circumstances. For example,
when we are in an area we know fairly well, we usually run the unit in
default North Up. But, we'll sometimes switch to Track Up when we're
in an unfamiliar area and want to instantly coordinate what we see out
the window with what we see on the screen. Try all three modes to find
what works best for you.
To change map orientation: from the Map Page, press
|
O
ENT
RIENTATION
. Press
ENT
EXIT
Navionics
Your unit can display Navionics
GOLD and CLASSIC format charts are accepted. They work just
like a MapCreate custom map on an MMC.
Left, entrance to Aransas Pass in a MapCreate 6 custom map, 4 mile
zoom. Remaining images, from left to right: same position on Navionics
GOLD chart at 8 mile, 4 mile and 1 mile zoom ranges.
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press
. Use ↑ or ↓ to select the Map Name, then press
|
C
ENT
HOICE
|
|
ENT
EXIT
EXIT
. Press ↑ or ↓ to select an orientation option, then press
|
to return to the page display.
EXIT
Charts
.
electronic charts on MMCs. Both the
|↓ to
MENU
M
72
MENU
|
|↓ to
D
ENT
AP
ATA
|↓ to
M
AP
M
AP
- Quick Links:
- Operation Instructions
Hide quick links:
Advertisement
Table of Contents
