Searching - Lowrance iFINDER PhD Operation Instructions Manual

3. To save data from iFINDER to the MMC: press
4. To accept the default name "Data" for the GPS Data File, press ↓ to
| . (If you wish to rename the file, press
S ENT
AVE
lection box. Press ↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then, press
|↓ to
ENT S
AVE
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
| |
EXIT EXIT EXIT

Searching

Now that you've seen how iFINDER can find where you are, let's search
for something somewhere else. Searching is one of the most powerful
new features in the Lowrance GPS product line.
In this example, we'll look for the nearest fast-food restaurant. For more
information on different types of searches, refer to Sec. 6, Searching.
NOTE:
This example requires the Point of Interest (POI) database included
with a FreedomMap or a high-detail MapCreate custom map.
After iFINDER has acquired a position:
1. Press |↓ to
FIND
2. You could search the entire restaurant category, but in this example
we will narrow our search. Press → to
with a list of the nearest restaurants at right.
3. iFINDER says it is calculating, then a list of restaurants appears,
with the closest at the top of the list, and the farthest at the bottom of
the list. The nearest is highlighted.
| .)
ENT
.
M P
AP LACES
At left, the Category Selection menu,
| |↓ to
ENT POI-R
F
AST
50
(for
ENT
to activate the se-
ENT
.
ESTAURANTS
|
F C ENT|ENT.
OOD HAINS
).
S
AVE