Dell PowerVault ME5 Series Owner's Manual page 96

Table 28. Event descriptions and recommended actions (continued)
Number Severity
249 Info.
250 Warning
251 Info.
253 Info.
255 Info.
257 Info.
259 Info.
260 Info.
261 Info.
262 Info.
263 Warning
96 Events and event messages
Description/Recommended actions
Recommended actions:
● No action is required.
After a valid license is installed, this event is logged for each licensed feature to show the new
license value for that feature. The event specifies whether the feature is licensed, whether the
license is temporary, and whether the temporary license is expired.
Recommended actions:
● No action is required.
A license could not be installed.
The license is invalid or specifies a feature that is not supported on your product.
Recommended actions:
● Review the readme file that came with the license. Verify that you are trying to install the
license in the system that the license was generated for.
A volume-copy operation has started for the indicated source volume.
Do not mount either volume until the copy is complete (as indicated by event 268).
Recommended actions:
● No action is required.
A license was uninstalled.
Recommended actions:
● No action is required.
The PBCs across controllers do not match as PBC from controller A and PBC from controller B
are from different vendors.
This may limit the available configurations.
Recommended actions:
● No action is required.
The indicated snapshot has been prepared and committed and is ready for use.
Recommended actions:
● No action is required.
In-band CAPI commands have been disabled.
Recommended actions:
● No action is required.
In-band CAPI commands have been enabled.
Recommended actions:
● No action is required.
In-band SES commands have been disabled.
Recommended actions:
● No action is required.
In-band SES commands have been enabled.
Recommended actions:
● No action is required.
The indicated spare disk is missing. Either it was removed or it is not responding.
Recommended actions: