Dell PowerVault ME5 Series Owner's Manual page 55

7. Attach the appropriate drive size label to the label location on top of the upper assembly.
Installing a replacement 3.5" disk drive into a DDIC
Each replacement disk drive is shipped with a new disk drive in carrier (DDIC).
Install the replacement disk drive in the DDIC before opening the drawer of the enclosure to remove the failed drive.
1. Insert the SAS connector into the SAS interface on the disk drive.
2. Slide the disk drive into the lower assembly of the DDIC.
3. Remove the protective film from the upper assembly of the DDIC.
Module removal and replacement 55