Table of Contents
Advertisement
Available languages
Available languages
When using H-Essence in certain settings or room environment, the GAS VOC level may change due to the detection of the fragrances.
The Diffuser Function only works when the Air Quality LED Ring is on green color, it will pause when the LED Ring is not green and
continue working when it gets back to green.
The Diffuser function can only be used in AUTO & MAX modes and cannot be used in SLEEP mode.
When activating the Diffuser function in AUTO mode, the main fan will work with a specific speed to help to spread the H-Essence or the
H-Biotics into the room.
Setting
SOFT
MEDIUM
CUSTOM
H-BIOTICS
4. MAINTAINING YOUR H-PURIFIER
4.1 FILTER MAINTENANCE
Your H-Purifier will monitor the condition of your filter. A CLEAN FILTER or REPLACE FILTER alert will blink on the left side of the display indicating
action is required to clean or change the filter.
Cleaning / Replacing the Filter: [Fig. 15]
•
Remove the Air Inlet Cover from your product. [Fig. 15a]
•
Unlock the Filter Release Switch. [Fig. 15b]
•
Remove the Filter from your product. [Fig. 15c]
•
Use a Vacuum Cleaner to clean the external layer of the Filter or Replace with a NEW filter. [Fig. 15d]
•
Refit the Filter into the product. [Fig. 15e]
Lock the Filter Release Switch. [Fig. 15f]
•
Refit the Air Inlet Cover to your product. [Fig. 15g]
•
•
Plug in your appliance to the power supply and switch on.
•
Press the INFORMATION button to reset the Cleaning/ Replacing alert by holding the button for 3 secs, an audible alert will be heard to
indicate a successful reset. [Fig. 7]
Fig. 15
4.2 DIFFUSER MAINTENANCE
After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product surfaces.
Diffuser Bottle Replacement: [Fig. 16]
The volume of liquid in the bottle can be checked through the Diffuser Window, when required the bottle should be replaced.
•
Remove the diffuser cover from the product. [Fig. 16a]
Remove the Diffuser Unit & Bottle from the diffuser cover. [Fig. 16b]
•
•
Unscrew & remove the empty bottle. [Fig. 16c]
Remove the new bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 16d]
•
•
Tightly screw the new bottle onto the diffuser unit. [Fig. 16e]
Refit the diffuser unit into the diffuser cover. [Fig. 16f]
•
•
Refit the Diffuser cover into the H-Purifier. [Fig. 16g]
Fig. 16
Diffusing Timing
for 10 sec every 5 min
for 90 sec every 3.5 min
User Defined
for 2 min every 4 min
Cycle max duration
6 hours
6 hours
6 hours
6 hours
GB
9
Advertisement
Table of Contents
