Manufacturer's Recycling And Energy Information; Disposing Of Your Old Nec Product; Energy Saving - NEC MultiSync WD551 User Manual

Hide thumbs Also See for MultiSync WD551:
Table of Contents

Advertisement

Manufacturer's Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top
priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly
products, and always strive to help define and comply with the latest independent standards from agencies such as ISO
(International Organisation for Standardization) and TCO (Swedish Trades Union).

Disposing of your old NEC product

The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling facilities can be
found on our following websites:
https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml
https://www.necdisplay.com

Energy Saving

This monitor features an advanced energy saving capability.
For additional information visit:
https://www.necdisplay.com/
http://www.nec-display-solutions.com/
https://www.nec-display.com/global/index.html
For ErP requirement /
Except for conditions below
[Advanced setting] in [Other settings] in [WCDmode]is set to [WCD mode]
Power consumption: 0.5 W or less
Time for power management function:5 min. (Default setting)
WEEE Mark (European Directive 2012/19/EU and amendments)
Disposing of your used product: In the European Union
EU-wide legislation as implemented in each Member State requires that used electrical and electronic products
carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors
and electrical accessories, such as signal cables or power cords. When you dispose of such products, please
follow the guidance of your local a uthority or ask the shop where you purchased the product, or if applicable,
follow applicable legislation or agreement you may have. The mark on electrical and electronic products may
only apply to the current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority
and ask for the correct method of disposal.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation.
According to EU directive 2006/66/EC and amendments, the battery can't be disposed improperly. The battery shall be
separated to collect by local service.
(in USA).
(in USA)
(in Europe)
(Global)
English-39
(in Europe),

Advertisement

Table of Contents
loading

Table of Contents