Table of Contents
Advertisement
Mounting location
CAUTION:
Improper installation of the monitor may result in damage
to the monitor, an electric shock or fire. Do not install the
monitor in the locations below:
• DO NOT install in locations where a door or gate can hit
the unit.
• DO NOT install in areas where the unit will be subjected to
strong vibrations and dust.
• DO NOT install the monitor next to a location where the
main power supply is fed into the building.
• DO NOT install the monitor in a location where people
can easily grab and hang onto the unit or the mounting
equipment.
NOTE:
• The ceiling or wall must be strong enough to support the
monitor and mounting accessories.
• To avoid scratching the LCD panel, always place a soft
cloth, such as a blanket that is larger than the monitor's
screen area, on the table before laying the monitor face
down when installing the monitor stand or mounting
accessories.
• Be careful not to crush the camera or buttons.
Attaching Mounting Accessories
The monitor is designed for use with a mounting system.
Be careful to avoid tipping the monitor when attaching
accessories.
B
A
inch
Spec. (A x B)
WD551
400 x 200 mm
Mounting accessories can be attached with the monitor in the
face down position. Make sure there is nothing on the table
that can damage the monitor.
NOTE:
Prior to installation, place the monitor face down
on a flat even surface that is larger than the
monitor screen. Use a sturdy table that can easily
support the weight of the monitor.
C
Standard screw
Quantity
(C x D)
M8 x 25 mm
4
English-15
Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the enclosure
to allow heat to disperse, as shown below.
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from
the unit and the mounting equipment.
D
27 mm
150 mm
100 mm
Advertisement
Table of Contents
