Advertisement
Quick Links
Advertisement
Related Manuals for NEC WD551
Summary of Contents for NEC WD551
- Page 1 Firmware Update Procedure by USB Rev.1.0...
- Page 2 User’s Manual. ◼ Precautions Target model : WD551 Do not turn off the main power of this device, or extract USB storage device during update. USB port of this device does not guarantee all USB storage devices to work properly.
- Page 3 Preparation for Firmware Update Unzip firmware file Unzip firmware file. There is upgrade_3686 folder. FIRMWARE_WD551_SW_****.zip unzip ¥FIRMWARE_WD551_SW_**** ¥upgrade_3686 Information The file name for the Firmware File will be following: （ ） FIRMWARE File Name Extension FIRMWARE FIRMWARE_WD551_SW_****.zip .zip （*1） **** ：...
- Page 4 Connect USB storage device with upgrade_3686 folder stored Insert the USB storage device into USB port (SERVICE PORT) of the monitor. Preparation for firmware update has completed. Please move on to “Update Firmware”(→P5).
-
Page 5: Update Firmware
Update Firmware Note Do not turn off the main power of this device, or extract USB storage device during update. Turn on the main power of this device Press power button until its LED blinks Press power button until the LED of power button start to blink and then release power button. Firmware update starts. - Page 6 Automatically reboot twice After firmware update starts, the monitor reboots twice as below. Screen 1 reboot Screen 2 reboot...
- Page 7 Initial Setup scree is displayed Upon the completion of update, Initial Setup screen is displayed. Perform the initial setup. Remove USB storage device from the monitor Firmware update has completed.
- Page 8 When failed to update firmware When you have failed to update firmware, please check the following points. ◼ Device does not operates with power on If you turn off the main power under update failed condition, this device may not operate properly. However, update function with USB storage device may be available, so please follow the procedure in this document and try to update again.