3idee 24B1H Assembly Instructions

Vesa adapter

Hide thumbs Also See for 24B1H:

Table of Contents

Download this manual

24B1H VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following AOC (aoc.com) products:

24B1H.

The VESA adapter allows you to conveniently mount your AOC brand monitor to a

monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels. (not included in the scope of delivery)

www.3idee.eu

Table of Contents

Need help?

Do you have a question about the 24B1H and is the answer not in the manual?

Page 1 24B1H VESA Adapter Assembly instructions The VESA adapter is compatible with the following AOC (aoc.com) products: 24B1H. The VESA adapter allows you to conveniently mount your AOC brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2 Lay your AOC monitor flat on a safe and soft surface and remove the stand. (Figure 1) Figure 1 Step 2 Now take the 3idee VESA adapter and "lever" it onto the base of your AOC monitor as shown. (Figure 2) Figure 2 Step 3 This is how the adapter should now hang on your AOC monitor.
Page 3 Assembly instructions Step 5 Please check if the adapter is properly connected to the monitor. (Figure 5) Figure 5 Step 6 For optical reasons you can fold down the lever of the screw so that it is not visible later. (Figure 6) Figure 6 Step 7 For this step, we recommend the help of a 2nd person.
Page 4 We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...