3idee hp-pav Assembly Instructions Manual

Vesa adapter

Download this manual

hp-pav VESA adapter

Assembly

instructions

The VESA adapter is compatible with the following products from

(hp.com):

Pavillion 32 QHD

The VESA adapter allows you to conveniently mount your HP brand monitor to a

monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

www.3idee.eu

Table of Contents

Page 1 VESA adapter Assembly instructions The VESA adapter is compatible with the following products from (hp.com): Pavillion 32 QHD The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2: Important Safeguards
Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should also always be given. Failure to follow these instructions may result in injury or damage to people and the product, for which we cannot accept any liability.
Page 3: Waste Disposal
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
Page 4 Assembly instructions Assembly instruction as video...
Page 5: Assembly Instruction
Loosen the screw that connects the base to your monitor and pull the base off. Step 2 Now slide the 3idee VESA adapter into the mount of your monitor as shown. (Figure 1) A little force is required for this.
Page 6 Assembly instructions Step 5 Please make sure that all 4 screws are tight. (Figure 4) Figure 4...