Remote Setup - Lorex L15LD420 Series Instruction Manual

6. Remote Setup

6. Remote Setup
The Remote Setup is used to change the settings on the Remote System. The IRS Setup must
be configured and connected prior to using the Remote Setup Application.
1
1.Configuration Display Window - Displays the System Settings (once a connection to the
Remote System has been established). Please refer to the Hardware Manual for specific System
Settings and Configurations.
2. Connection Information - The connection information is automatically populated once a
connection has been made with the IRMS Setup. This information can also be manually changed
on this screen.
3. Connect / Disconnect - Click to Connect to the Remote System. Once a connection has been
made, the Display Window will show the settings that can be changed on the System. Click the
Disconnect button to close the connection.
4. Close - Closes the window.
Configuration / Alarm:
Configure the Alarm IN options for each channel, corresponding to the Alarm Block.
• Channel Select: Choose a
Camera.
• Input: Set to Normally Open or
Normally Closed.
• Duration: Set the Alarm
Duration (in seconds)
Click the Update button to change
the Remote Settings.
18
2
3
4