Search - Lorex L15LD420 Series Instruction Manual

3. Search

The Search window is used to search through previously recorded data on the Remote System.
The IRS Setup must be configured and connected prior to using the Search Player.
1
2
1. Main Screen View
4. Screen Views
7. Control Buttons
1. Main Screen Camera View - Displays the cameras during video playback.
2. Playback Controls - The Playback controls become active once video has been loaded into
the Search window. Use the controls to Reverse Playback (fast), Reverse Playback (normal),
Stop/Pause, Play regular speed or fast forward.
3. Connection Information - The Connection Information will automatically be populated once it
has been entered into the IRS Setup (and a connection to the System has successfully been
established). This information can also be manually changed on this screen:
• IP: Enter the IP address of the System
• PORT: Enter the PORT for the system (default 50000)
• ID: Enter ID (default: ADMIN)
• PW: Enter the password (default: blank)
4. Screen Views - Changes the Screen Division to Single Channel view or 4-Channel Split
Screen View. Use the Channel Buttons 1~4 to switch to the corresponding camera.
5. Status Window - Displays the current connection status and bit rate.
6. Start / End Time - Displays the Start and End times of the available recording.
2. Playback Controls
5. Status Window
8. Search Time
3. Connection Information
6. Start / End Time
3. Search
3
4
5
6
7
8
11