Lorex Client 2.0 Remote Access Setup - Lorex L15LD400 Instruction Manual

Remote Access with the DDNS Service

Lorex Client 2.0 Remote Access Setup

The remote connection information needs to be added to the Lorex Client software to allow for a
remote connection (using DDNS).
1. Load the Lorex Client 2.0 Software. Click on SETUP to add the configuration.
2. The Remote Viewer Setup window will
load to the IP/PORT Tab. Click on the
DDNS option (all settings will be
greyed out).
3. Enter your DDNS Information as
follows:
• USER NAME - Enter the user name
you configured on the DDNS
Website (default is set to GROUP
as an example, and can be
deleted).
• DVR NAME - Enter the DVR name
you configured on the DDNS
Website.
4. Click the SAVE Button to accept the
settings.
5. Click on the GET IP button to retrieve
the IP Address and Port Number from
the DDNS Server.
6. Enter the User ID and Password for the
Observation System:
• User ID - admin (default)
• Password - leave blank (default)
NOTE: It is highly recommended that you change the System password. Please refer to
your Hardware Manual for menu settings.
7. Press OK to save the settings, and close the configuration window.
8. Click the CONNECT button to remotely access your Observation
System.
22