Backup - Lorex L15LD420 Series Instruction Manual

4. Backup

The Backup window is used to create a local backup of the System date to the PC. The IRS
Setup must be configured and connected prior to using the Backup Application.
1
2
1. Connection Information
4. Backup Status
1. Connection Information - Enter the System Connection information, including:
• IP Address: Enter the IP address or DDNS Address of the System (must be configured in
IRMS Setup, and a connection established).
• Network Port: Enter the port for the System (50000 by default).
• User ID: Enter "Admin" (or another user as configured in the Remote System).
• User Password: Enter Admin's password (blank by default)
• Save File Path: Set a path to save the backup file (This function is active only when the
connection is established)
• Start Backup Time: The start time of file backup (This function is only active under the
connection is established")
• End Backup Time: The end time of file backup (This function is only active under the connection
is established")
2. Connection Setup -
• Connect Test: Click to test the connection status. A success message should appear in the
Message Box (#4) when a connection is established.
• Lock / Unlock: Locks the System for Backup, and retrieves list. Click UNLOCK to stop.
• Set Backup Time: Set the start/end time, size and path of file backup.
• Start Backup: Active the backup function.
2. Connection Setup
5. Setup / Close
3. DVR Server Information
4. Backup
3
4
5
13