Connecting The Equipotential Bonding; Attaching The Identification Plate - OBO Bettermann PYROPLUG MagicBox Mounting Instructions

Installation
7 3
7 4
20 | EN
3. Fix the PYROPLUG
3
position.
Note! Fastening material not contained in the scope of delivery.
4. Mask the PYROPLUG
PYROPLUG MagicBox with plaster filler.
®
5. Perform the installations.
6. Fill large cavities with inlay blocks.
7. Close off residual openings with PYROSIT
6
→ Create equipotential bonding using flat connectors, see „7.3 Potentia-
lausgleich anschließen" auf Seite <?>.
→ Attach the identification plate, see „7.4 Kennzeichnungsschild anbring-
en" auf Seite <?>.

Connecting the equipotential bonding

Abb 11: Creating equipotential bonding
Create a connection to the equipotential bonding via the earthing point
on the PYROPLUG MagicBox using a flat connector (size 6.3) or suita-
®
ble screws.

Attaching the identification plate

The insulation must be labelled according to the proof of suitability
MagicBox to the base using screws to fix the
®
MagicBox and close off the gap around the
®
5
4
NG fire protection foam.
®
OBO Bettermann