First Support Of The Installations - OBO Bettermann PYROPLUG MagicBox Mounting Instructions

Installation
Note!
7 1 2
14 | EN
7. Close off residual openings with PYROSIT
6
→ Create equipotential bonding using flat connectors, see „7.3 Potentia-
lausgleich anschließen" auf Seite <?>.
→ Attach the identification plate, see „7.4 Kennzeichnungsschild anbring-
en" auf Seite <?>.
The PYROPLUG MagicBox can also be used as reserve insulation and
®
be completely filled with inlay blocks. Cavities must be sealed with PY-
ROSIT NG fire protection foam.
®
Group arrangement
In the case of mounting in a group arrangement, the mounting of the
individual PYROPLUG
Wandmontage" auf Seite <?>.
The cavities between the PYROPLUG
closed off if the graphite strips are touching. Otherwise, close off with
PYROSIT NG.
®

First support of the installations

When the PYROPLUG
pendulum or bracket support structures, the distance between the first
support structure and the PYROPLUG
cm.
Abb 7: Mounting the 4-sided PYROPLUG
8. Mount the first support of the support structure (pendulum or bracket)
at a distance of max. 20 cm.
MagicBoxes takes place as described in „7.2.1
®
MagicBoxes do not have to be
®
MagicBox is mounted in combination with the
®
MagicBox may not exceed 20
®
MagicBox (support structure)
®
NG fire protection foam.
®
OBO Bettermann