Retrofitting; Maintaining The System; Disposing Of The System - OBO Bettermann PYROPLUG MagicBox Mounting Instructions

7 5
8
9
PYROPLUG MagicBox
®
Abb 12: Attaching the identification plate
1. Complete the KS-S DE identification legibly using a permanent mark-
er.
2. Attach the KS-S DE identification plate next to the insulation.

Retrofitting

There are the following options for retrofitting the PYROPLUG
Box:
– Removal of one or more inlay blocks, if available
– Penetrate the foam using individual cables
– Penetrate the foam with an installation pipe
Then, close off residual openings with PYROSIT
foam.

Maintaining the system

The PYROPLUG MagicBox insulation system does not require mainte-
®
nance.
During an inspection of electrical systems, carry out a visual inspection
of the insulation. Close off any gaps with PYROSIT
foam.

Disposing of the system

National laws and regulations must be observed for disposal.
Disposal during building demolition
– Installed PYROPLUG
mixed construction waste
MagicBox materials must be disposed of as
®
Maintaining the system
Magic-
®
NG fire protection
®
NG fire protection
®
21 | EN