Table of Contents
Advertisement
12. Schematics, Assembly Drawings, and BOM
The schematics, assembly drawings and bill of materials (BOM) for the EFM8LB1 Starter Kit board are available through Simplicity Stu-
dio when the kit documentation package has been installed. These files are also available from the links below.
•
EFM8LB1 Starter Kit (STK) BOM
•
EFM8LB1 Starter Kit (STK) Schematic
12.1 Board Revision History
• A00 — Initial prototype revision.
• A01 — Changed to surface mounted joystick and smaller reset switch.
• A02 — Cleaned up the signal generator circuit and updated silk print.
• A03 — Updated EFM8LB1 device revision and adjusted the reset switch.
• A04 — Changed D801 to "not mounted". Changed X900 to KDS DSX321G.
• A05 — Updated EFM8LB1 device revision.
A00 Revision Boards
There are no known issues with the A00 boards.
A01 Revision Boards
There are no known issues with the A01 boards.
A02 Revision Boards
There are no known issues with the A02 boards.
A03 Revision Boards
There are no known issues with the A03 boards.
A04 Revision Boards
There are no known issues with the A04 boards.
A05 Revision Boards
There are no known issues with the A05 boards.
silabs.com | Building a more connected world.
UG126: EFM8LB1-SLSTK2030A User's Guide
Schematics, Assembly Drawings, and BOM
Rev. 0.6 | 20
Advertisement
Table of Contents
Need help?
Do you have a question about the EFM8LB1-SLSTK2030A and is the answer not in the manual?
Questions and answers