Section 6: Current Consumption; Current Consumption - Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual

Section 6: Current Consumption

February 2022
Section 6: Current Consumption
Minimum current consumption is obtained via the following configuration:
•
•
In the above condition, the current consumption measured by a multimeter (on average on
an XTE3000 supplied at 24 V DC) is 58 mA, corresponding to 1.4 W (at 24 V DC).
If the actuator is equipped with a 4 - 20 mA position transmitter module, the current
consumption is 78 mA.
If the parameter "MR in SLEEP" in "Actuator Setup" menu, "Restricted" section is in "ON",
the current consumption is 98 mA (2.4 W at 24 V DC).
When actuator exits from SLEEP mode, all XTE3000 functions are restored to normal
operation and the current consumption returns to normal.
6
Installation, Operation and Maintenance Manual
Actuator without 4 - 20 mA position re-transmission card
Parameter "MR in SLEEP" in "Actuator Setup" menu, "Restricted" section in "OFF"
VCIOM-15070-EN Rev. 1

Current Consumption