Bissell CrossWave HF3 Quick Start Manual

Cordless multi-surface wet dry vac

Hide thumbs Also See for CrossWave HF3:

Table of Contents

Download this manual

My CrossWave HF3 is leaking | Support

HF3™ Cordless Multi-Surface Wet Dry Vac

If your CrossWave HF3 is leaking, follow these

steps to solve the issue

Store machine with empty tanks

Always store machine with both clean and dirty tanks empty to prevent leaking

•

If overheated water (over 140 ºF) is used > Damage will occur

•

Use water directly from tap without heating

•

Remove clean water tank

•

Table of Contents

Do you have a question about the CrossWave HF3 and is the answer not in the manual?

Page 1 My CrossWave HF3 is leaking | Support HF3™ Cordless Multi-Surface Wet Dry Vac If your CrossWave HF3 is leaking, follow these steps to solve the issue Store machine with empty tanks Always store machine with both clean and dirty tanks empty to prevent leaking •...
Page 2 Press button on top of tank > Pull out to remove...
Page 4 Open tank flap •...
Page 6 Is rubber gasket torn or damaged? • No > Go to next step Yes > Go to Parts & Supplies to replace tank Fill water tank with water • Hold over sink > Does tank leak from inlet port? Yes > Go to Parts & Supplies to replace tank ...
Page 7 Check tank for cracks or warping • If tank is damaged > Go to Parts & Supplies to replace tank Test machine Recline machine and turn ON • Make several test strokes to test for problem Did this resolve your issue? No >...