Advertisement
Quick Links
My Hydrowave has no suction | Support
•
Remove the Machine from the Storage Tray
•
Power your machine off and unplug it
•
Remove Dirty water tank by pressing down on the recessed button on the top of the tank
•
With a cleaning mode selected and the machine powered on, feel for suction strength at the motor
vents
o
if no suction visit a bissell authorized service center, or Contact Us
o
if suction is strong, continue troubleshooting
•
Empty the dirty water tank by grabbing the top of the tank in the recessed are on each side of the
Float Stack
o
Pour dirty water and debris out
o
Check the dirty water tank for any cracks or damage
o
if your dirty water tank is cracked or damaged, the dirty water tank should be replaced
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bissell Hydrowave
Summary of Contents for Bissell Hydrowave
- Page 1 • With a cleaning mode selected and the machine powered on, feel for suction strength at the motor vents if no suction visit a bissell authorized service center, or Contact Us if suction is strong, continue troubleshooting • Empty the dirty water tank by grabbing the top of the tank in the recessed are on each side of the...
- Page 2 • Remove the filter from the float stack and clear it of debris...
- Page 3 • Hand wash filter with warm water • Rinse the float and clear any debris Make sure the float moves up and down smoothly • Allow float, filter, and dirty tank to dry completely...
- Page 4 • Clear any clogs in the debris pathway and check for damage in the dirty tank pocket • Put the dirty water tank back in the machine Angle the tank back into the body of the machine inserting the bottom first Tilt the top of the tank toward the machine and push into place until you hear a click...
- Page 5 • Remove the Nozzle from the foot of the machine by pulling up on both sides of the Nozzle check for any cracks or damage to the Nozzle if the Nozzle is cracked or damaged, a replacement should be ordered •...
- Page 6 • Clear the suction gasket of any debris...
- Page 7 • Put Nozzle back on the machine Line up the tabs on the front edges of the foot and push the nozzle into place until it clicks...
- Page 8 • Turn machine on and choose express clean, or deep clean mode to turn on the machine and test for suction If there is still no suction, Contact Us...
Need help?
Do you have a question about the Hydrowave and is the answer not in the manual?
Questions and answers