Ford FOCUS ELECTRIC 2013 Owner's Manual page 34

2. Switch off the electric motor and any
electrical equipment.
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
To Start Your Vehicle
1. Run the engine of vehicle B at a
moderately high speed.
2. Move the transmission selector lever
of vehicle A to position P.
3. Switch on the ready to drive mode. See
Starting the Electric Motor (page
19).
4. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could blow the bulbs.
Disconnect the cables in the reverse order.
Focus Electric (CB8) Vehicles Built From: 13-07-2012, Vehicles Built Up To: 31-12-2013, Battery Electric Vehicle (BEV)
Roadside Emergencies
32