NLTroubleshooting
Malfunction
"E:30/-20"
Device not working.
Program does not start.
Door cannot be
opened.
44
Cause and Troubleshooting
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 52
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
The fuse in the fuse box has tripped.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
Start/Refill
PressStart/Refill
▶
Door is not closed.
Close the door.
1.
To start the program, pressStart/Refill
2.
.
Child lock is activated.
→ "Deactivate child lock", page 34
▶
- Ready in + is activated.
Check if -Ready in + is activated.
▶
→ "Buttons", Page 24
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, pressStart/Refill
4.
.
is activated.
Resume the program byCentrifugeorDrain
▶
to choose and pressStart/Refill
to press.
→ "Resume program at rinse hold", page 34
Temperature is too high.
was not pressed.
.
at