Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-8. Refrigerator Fan and Fan Motor in freezer
Step
1
Loosen 3 special screws(stay bolts) and
disconnect the connector.
2
3
Remember how to arrange the wires.
Remove wires from a hooks.
4
Remark :
NG
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Separate the R Fan
Motor assembly.
Supporting the back side of fan
with a finger, pull out and
remove the fixing spring with a
long nose plier. If necessary,
scratch the lock paint(green
one).
Follow the reverse order when assembling.
Step
5
Break the shaft(plastic) of fan blade. Do not use the
old fan again. Be careful not to damage the shaft of
motor if the motor is used again.
Remove the fan and motor.
6
Show the left picture. If you
strongly pull out the fan blade
and remove, the fan and shaft
of the motor will be damage
and have a bad performance.
Description
If necessary, remove the
rubber vibration isolator in the
front of the Fixture R Motor.
50 / 62
Advertisement
Table of Contents
