Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-1. Water Valve Assembly
Step
Turn off the main water supply to the appliance.
1
2
A
3
Remark :
• Remove any residual matter inside the water supply line after installation.
1) Turn on the main water supply to the refrigerator .
2) Do the icemaker Test Mode and throw away the ice on tray.
3) And then empty the ice storage bucket check. Be sure no water on the bucket.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove cover
machine room on the
back side of
refrigerator and
unscrew.
Remove ¼" tube connected
to water flow sensor from
the hose icemaker tube
while pressing the part (A).
Follow the reverse order when assembling.
Water Flow Sensor
Neutral
43 / 62
Advertisement
Table of Contents
