Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-3. Cover Multi-duct Assembly
Step
1
2
Press two fixing hooks in top of the divider and pull
the divide out from the vegetable cover to remove.
3
4
Remark :
• Do not use the small screw in the upper side of Multi-duct Assembly. The screw could be loose.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove shelves and two
vegetable cases.
Remove the
vegetable
cover. and full
wide drawer
cover.
Remove the
full wide
drawer cover.
Follow the reverse order when assembling.
Step
5
Remove two caps with a thin flat tool.
6
7
8
Disconnect a sensor connector and a damper
connector from back wall.
Description
Loosen the upper
screw(big one; outside
diameter of thread 5mm)
and lower screw(small
one; outside diameter of
thread 4mm)
Hold the top side of
the Cover Multi-duct
and then pull it to
release hooks.
45 / 62
Advertisement
Table of Contents
