Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-7. F Fan and Fan Motor
Step
1
Loosen 8 screws to remove Fixture F Motor A.
2
Loosen a screw to remove Cover Fan Motor
3
Separate the wires from hook. Remember how to
arrange the wires.
4
Remark :
NG
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Fixture F Motor A
Supporting the back side of fan
with a finger, pull out and
remove the fixing spring with a
long nose plier. If necessary,
scratch the lock paint(green
one).
Show the left picture. If you strongly
pull out the fan blade and remove, the
fan and shaft of the motor will be
damage and have a bad performance.
Follow the reverse order when assembling.
Step
5
Break the shaft(plastic) of fan blade. Do not use the
old fan again. Be careful not to damage the shaft of
motor if the motor is used again. Remove the fan
and motor.
Description
49 / 62
Advertisement
Table of Contents
