Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-4. Refrigerator Sensor and R Damper in Cover Multi-duct Assembly
Step
1
Separate the insulator from the multi-duct cover.
2
Remove R sensor on the upper side of cover.
Insulator C
3
Insulator D
4
Separate Insulator D and remove R damper.
Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Take off the tape and
separate Insulator C
covered R damper.
Before disassembly
check the arrangement
of wires and connector.
Follow the reverse order when assembling.
46 / 62
Advertisement
Table of Contents
