Table of Contents
Advertisement
10. Disassemble/Assemble Procedures
10-2. Icemaker and Hose Icemaker Tube Assembly
Step
1
2
3
Disconnect the connector of icemaker.
4
Remark :
• After assembling, push the test button and confirm the icemaker operation include water supply.
• After finishing test, the ice bucket should be emptied because the ice cubes in icemaker tray could be not fully frozen.
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Remove drawers
Unscrew and
remove icemaker
on the top of the
freezer wall.
Disconnect the
connector of
Hose Icemaker
Tube Heater.
Follow the reverse order when assembling.
Step
5
Unscrew and remove the hose icemaker tube cover
on back of cabinet.
6
Remove icemaker tube and silicon water inlet part.
And then pull out the hose carefully not to damage
the wires.
Description
44 / 62
Neutral
Advertisement
Table of Contents
