Introduction; Tradename And Identification - Tec-Innovation INNOMAKE CLIP User Manual

1. Introduction

The InnoMake Clip is an intelligent obstacle detection system with which we aim
to provide more safety when walking and reduce barriers when interacting with
our environment.
For unrestricted and safe use of the InnoMake Clip, it is important to read these
instructions for use carefully, including the safety instructions.
With these Instructions for Use, we would like to help you get to know the
InnoMake Clip product and facilitate your first steps with the product.
Reading the instructions for use will help you to get to know and use the full
range of functions of InnoMake Clip. We recommend that you keep this
document so that you can refer to it at a later date.
These instructions for use are also available on our website www.tec-
innovation.com at any time, also with the aid of a read-aloud program.

1.1. Tradename and identification

InnoMake Clip
Serialnumber:
Tec-Innovation GmbH
Headquarter:
A-2123 Hautzendorf, In der Au 5
Office:
Holz-Steiner Strasse 6/6/1
A-2201 Gerasdorf / Vienna
TDIMC1_4_User Manual_IMC-1.1.0_EN
Contact:
E-Mail:
office@tec-innovation.com
Web: www.tec-innovation.com
3