Handling; Storage And Transport; Cleaning And Disposal - Tec-Innovation INNOMAKE CLIP User Manual

Exposure to magnetic fields
 Transformers (except for low voltages, such as transformers in hi-fi systems),
devices with inductive charge, such as electric toothbrushes,

devices with electric motors, such as vacuum cleaners

Interference sources in the same frequency range
 other ultrasound sensors
Clanging or high-pitched sounds, such as moved keychains


6. Handling

6.1. Storage and transport

It is recommended to ensure dry, low-dust storage and transport of the InnoMake Clip.
During storage and transport, the product should be protected from direct sunlight and
vermin as well as extreme heat and fire. The product must be kept away from heaters,
ovens or radiant heaters.
The permissible environmental conditions can be found in detail in the technical data in
section 7.
:
NOTE
It is essential to keep the InnoMake Clip and the USB charging cable out of the reach
of small children < 3 years of age. Due to the length of the USB cable of 1 meter, there
is a risk of strangulation!
For returning the InnoMake Clip to the dealer or to us, the most suitable product
packaging for the return is the one in which the product was delivered.

6.2. Cleaning and disposal

We recommend regular cleaning of the product to positively support the longevity of the
InnoMake Clip.
In particular, the two ultrasonic sensors on the front of the product and the USB socket
including the pressure mechanism of the lid should be cleaned of dirt particles and dust at
regular intervals. If the device is dirty, functional restrictions may occur on the mentioned
product features.
For soiling in the area of the ultrasonic sensors, we recommend cleaning with a soft
commercial brush. When using a brush, care should be taken not to apply too much force
during cleaning to prevent damage to the electronics.
TDIMC1_4_User Manual_IMC-1.1.0_EN 20