Notes And Measures In Case Of Environmental Influences - Tec-Innovation INNOMAKE CLIP User Manual

5.2. Notes and measures in case of environmental influences

In this section, we provide information regarding external influences or environmental
conditions that may occur during the usage of InnoMake Clip.
Temperature
Since the electronics of the product are each equipped with protection against

overheating, the device may switch itself off due to high ambient temperatures (s.
section 4.10). This protects the user in particular, but also the battery.
The InnoMake Clip should be protected from direct sunlight during storage or transport.

The permissible temperature ranges of the environmental conditions can be found in

detail in section 7
Humidity
 Extreme natural influences, such as downpours and muddy surfaces, can lead to
functional limitations.
 The InnoMake Clip is not protected against salt water. However, if the product comes
into contact with salt water, it should be cleaned with a damp cloth.
If the product is wet when you finish using it, you can dry it with a cloth or let it air dry

completely. It is also recommended to open the USB port and place the device with the
open USB port facing down. This will allow any water that may have accumulated to leak
out of the waterproof USB port.
If the InnoMake Clip cannot be switched on after coming into contact with water or other
liquids, or if it emits a continuous vibration after being switched on, the application must be
terminated, and the dealer is to be contacted.
If malfunctions and functional failures occur due to devices in the home environment, it is
recommended to switch the InnoMake Clip off and on again. Restarting the system should
restore the full functionality of the InnoMake Clip.
Turning the InnoMake clip on and off is described in
Find examples of possible influences in a domestic environment which, among other things,
can cause the InnoMake Clip not to measure distances to obstacles as follows:
External electrical and electromagnetic influences
Devices with radio modules such as:
WLAN-router

WLAN-amplifier

 Other devices with Bluetooth-connections
TDIMC1_4_User Manual_IMC-1.1.0_EN
technical data
section 4.1.
19