Bringing Your Stack Online; Warranty - Cisco Meraki MS250 Series Installation Manual

Hide thumbs

Table of Contents

then opening and email case or calling using the contact information on that page.

Bringing your Stack Online

MS250 switches can be connected in a physical stack using dedicated stacking ports and cables. Configuration steps

and additional information about stacking can be found here.

Warranty

MS Warranty coverage periods are as follows:

MS250

MS Accessories

Note: The above table is a general guideline for warranty terms and is not final. Warranty terms are subject to printed warranty information on the relevant online

Meraki data sheets.

If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the

device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid

shipping label so the faulty equipment can be returned.

In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to the original packaging the

hardware was shipped in. The original hardware packaging includes device serial number and order information, and may be required for return

shipping.

Meraki MS250 devices have been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. A

digital device that is marketed for use in a residential environment notwithstanding use in commercial, business and industrial environments.

Additional warranty information can be found on:

Support and Additional Information

If issues are encountered with device installation or additional help is required, contact Meraki Support by logging in to dashboard.meraki.com and opening a

case by visiting the Get Help section.

• The equipment is intended for industrial or other commercial activities.

• The equipment is used in areas without exposure to harmful and dangerous production factors, unless otherwise

specified in the operational documentation and/or on the equipment labeling.

• The equipment is not for domestic use. The equipment is intended for operation without the constant presence of

maintenance personnel.

• The equipment is subject to installation and maintenance by specialists with the appropriate qualifications, sufficient

specialized knowledge, and skills.

Time Period

Comments

Lifetime

The following are considered accessories: