The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described
below, from left to right.
Front Panel Components
Item
Function
1
Power
2
Restore
3
Switch Ports
In addition, there is a RESTORE button available on the front panel.
Insert a paperclip if a restore is required.
•
A brief, momentary press: To delete a downloaded configuration and reboot.
•
Press and hold for more than 10 sec: To force the unit into a full factory restore.
Back Panel Components
Item
1
2
LED Status
Solid orange
Flashing white
Solid white
Off
N/A
Off
Solid orange
Solid green
Function
Management Interface
Stack Ports
Meaning
Switch is unable to connect to the Meraki cloud
Firmware upgrade in process
Switch is fully operational and connected to the Meraki cloud
Switch does not have power
Restore button to clear switch IP and local configuration settings