Nortel 4065R User Manual page 85

To extract the MEM card from its frame:
1. Remove the MEM card from the frame, as shown in Figure 9.
Figure 9: Extracting the MEM card from its frame
To install the MEM card into the handset:
1. Place the MEM card into the MEM card tray with the notch in
2. Shift the MEM card under the two small crescents, as shown in
3. Press the MEM card downwards until the small tag b locks, as shown
Figure 10: Installing the MEM card into the handset
Reinstalling the battery pack
For information about reinstalling the battery pack, see "Installing the
battery pack" on page 10.
Get user manuals: See SafeManuals.com
Note: If a new MEM card is required, it is delivered in a larger frame;
use this step to remove it from the frame prior to installing it into the
handset.
Note: When removing the MEM card from its frame, ensure that you
do not touch the metal contacts.
position b and the metal contacts face down.
Figure 10 (1).
in Figure 10 (2).
2
1
b
a
Accessories
85