Nortel 4065R User Manual page 72

Configuring DECT system information
The handset can be subscribed to up to ten different communications
systems, for which it stores a subscription record. Each subscription
record includes a name; whenever the handset enters the range of a
DECT system, this name appears in the handset display.
Before you subscribe to a DECT system, acquire the following information
from your system administrator:
•
•
•
•
Subscription
Options
72
Get user manuals: See SafeManuals.com
Note: If your handset is preinstalled by your supplier, you need not
subscribe to a system. If the handset is not subscribed to any
systems, it displays the message No Subscription.
PARK code. Use a PARK code system ID only if more than one
DECT systems overlap in your location.
Authorization code. Use this code (PABX-PIN) to register the handset
with the DECT system.
DECT system name. The name of the system to which you are
subscribing. Once entered, it appears on the idle display. For more
information concerning the entry of numbers, see "Dialpad layout" on
page 36.
Local phone number assigned to your DECT handset.
1. Access the
the System menu:" on page 71.
2. Press the
N
Subscription
OK
3. Press the
4. Press the
N
option, and press the
New
OK
5. Press the
OK
Portable Equipment Identity (IPEI) display.
System
menu as shown in "Accessing
arrow
keys to scroll and highlight the
option, and press the
Options
soft key.
arrow
keys to scroll and highlight the
OK
soft key.
OK
soft key to confirm the International
OK
soft key.
New