Table of Contents
Advertisement
Fault
Water overflows when
filling the water tank.
The laundry is too
damp.
Cause and troubleshooting
The water tank for the crease-removal function is
empty.
Fill water tank.
▶
→ "Filling the water tank", Page 33.
The water tank has been filled.
Note: The overflowing water is harmless.
Do not pour any more water into the water tank.
▶
The water tank filter is soiled.
→ "Cleaning the water tank filter", Page 49.
▶
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 24
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 24.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 23.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 23.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 24
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 50.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 32.
2.
→ "Starting the programme", Page 29.
3.
Troubleshooting en
57
Advertisement
Table of Contents
